Witura WT-9001 IP65 Manual de usuario descargar pdf (Pagina 23)

WT-9001 IP65 GSM Remote Monitorin

& Remote Control S

stem

WT-9001 IP65 – USER MANUAL – Rev. 4.7 – Technical Support: [email protected]

WITURA CORPORATION SDN BHD

 Audible alarm will sound when input return to normal (if the alarm function is

turned on (*ALM[N]#1))

Function 9:

 Function as pulse counter

 Switch off output relay 1

Function 10:

 Function as pulse counter

 Switch off output relay 2

Function 11:

 Function as pulse counter

 Switch off output relay 3

Function 12:

 Function as pulse counter

 Switch off output relay 4

Note: It is required to reset the Counter Alert Value (*CLA#) each time you change the

input function.

Note: This Function Works On All Digital Inputs

The unit will report the state of all inputs when any input changes state for longer than a

programmable trigger time. The trigger time of each alarm input is programmable and

can be varied from a minimum of 500ms to a maximum of 999999ms. Any change that

does not remain stable for the specified trigger time will be ignored. The factory default

trigger time is 1 seconds.

Text Command:

*DLY[N]#X

N stands for number 5 - 12 of Input

X stands for time in milliseconds. Range from 500ms – 999999ms

Example:

Assume that you want digital input 5 to report when it changes state for more than

500ms, you would send the following SMS message to the unit.

*DLY5#500

5.4.12 Setting the Trigger Time of Alarm Input

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Sin comentarios

Witura WT-9001 IP65 Manual de usuario Pagina 23