Witura WT-9001 IP65 Manual de usuario descargar pdf (Pagina 21)

WT-9001 IP65 GSM Remote Monitorin

& Remote Control S

stem

WT-9001 IP65 – USER MANUAL – Rev. 4.7 – Technical Support: [email protected]

WITURA CORPORATION SDN BHD

Example:

Assume that you want it to send a counter alert message each time the input 5 has

triggered for 5 times, you would send the following SMS message to the unit.

*COA5#5

All digital inputs can be programmed to behave differently, it can count the input active

high pulses, generate an alarm message or activate relay. To program the input, you

can send the following commands by SMS message to the unit.

Text Command:

*CTC[N]#F

N stands for number 5 - 12 of Input. For pulse counter mode, N is input number 5 - 8

F stands for input function 1 - 12

Function Descriptions

Function 1:

 Function as pulse counter

Function 2:

 Function as pulse counter

 Activate the output relay number (according to the input number applied) to

stay on. Eg. If pulse counter 2 at Digital Input 6 reached the alert value, relay 2

will activate.

 Generates an alert message once alarm counter reaches the alert value

 Audible alarm will sound once alarm counter reached the alert value (if the alarm

function is turned on (*ALM[N]#1))

Function 3:

 Function as pulse counter

 Activate the output relay number (according to the input number applied) to

stay on. Eg. If pulse counter 3 at Digital Input 7 reached the alert value, relay 3

will activate.

 Sends a programmable input alert message (*STR[N]#) once input triggered

 Generates an alert message once alarm counter reached the alert value (in 1 SMS;

message concatenated)

 Audible alarm will sound once alarm counter reached the alert value (if the alarm

function is turned on (*ALM[N]#1))

5.4.11

Setting the Feature Of Digital Input

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Sin comentarios

Witura WT-9001 IP65 Manual de usuario Pagina 21