Witura WT-9001 IP65 Manual de usuario descargar pdf (Pagina 18)

WT-9001 IP65 GSM Remote Monitorin

& Remote Control S

stem

WT-9001 IP65 – USER MANUAL – Rev. 4.7 – Technical Support: [email protected]

WITURA CORPORATION SDN BHD

This function allows you to reset an input’s alarm set points to factory default settings.

To reset alarm set points, you can send the following command by SMS message to the

unit.

Text Command:

*CLP[N]#

N stands for Input number 1 - 4

Example:

To reset input 1 alarm set points to factory default, you would send the following SMS

message to the unit.

*CLP1#

Note: Factory Default for Alarm Set Point are 255 for all set points for all analogue

inputs

Note: This Function Works On Analogue Input Only

This function allows you to inquire the live status by an SMS. To check the level, you can

send the following command by SMS message to the unit.

Text Command:

*FST?#

Example of Returned Message:

ANIN1=15%

ANIN2=99%

ANIN3=10%

ANIN4=05%

Every input can generate text alerts to all 20 of the administrator’s Mobile phone

numbers and this function can be changed at any time by sending the following

commands by SMS message to the unit.

Text Command:

*RER[N]#XXXXXXXXXXXXXXXXXXXX

5.4.7 Setting the Alert Message Recipients

5.4.5 Reset the Alarm Set Points

5.4.6 Checking the Analogue Inputs Status

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Sin comentarios

Witura WT-9001 IP65 Manual de usuario Pagina 18