Witura WT-9001 IP65 Manual de usuario descargar pdf (Pagina 13)

WT-9001 IP65 GSM Remote Monitorin

& Remote Control S

stem

WT-9001 IP65 – USER MANUAL – Rev. 4.7 – Technical Support: [email protected]

WITURA CORPORATION SDN BHD

Example of Returned Message:

*RLY5=3600 OK

Note: Sending the following SMS Message to unit will switch off the relay

*RLY5#0

To check the status of a single relay, you would send the following example text

message (check status of relay 1) to the unit.

*RLY?1#

To check the status of all the relays, you would send the following text message to the

unit.

*RLY?#

To activate multiple output relays to stay on, you can send a text command via SMS

specifying the output number that should stay on to the unit.

Text Command:

*RLNU#XXXXXXXX

XXXXXXXX stands for 8 digits value: ON (1) or OFF (0) for the 8 Outputs

Example:

To switch on the output relay number 5, 6, 7, 8, you can send the following text

message to the unit.

*RLNU#00001111

Sending the following SMS Message to unit would mean all the relays will be switched

off.

*RLNU#00000000

The 1 indicates the ON command and the 0 (zero) indicates the OFF command

The unit can generate text alerts to all 8 of the administrator’s Mobile phone numbers

when the relay has turned on or off. To set the administrator to receive this alert, you

would send the following commands by SMS message to the unit.

5.3.2 Switch Multiple Outputs Relays to Stay On

5.3.3 Setting the Recipient of Relay Off Alert

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Sin comentarios

Witura WT-9001 IP65 Manual de usuario Pagina 13