Witura WT-1011RC IP 65 Manual de usuario descargar pdf (Pagina 20)

WT-1011RC IP65 GSM Remote Controller

And Alarm S

stem

WT-1011RC IP65 – USER MANUAL – Rev.1.6 – Technical Support: [email protected]

WITURA CORPORATION SDN BHD

*CTC1#1

Example of Returned Message:

#CTC1=<1>

Note: Only Input 1 may apply function F1 where only 2 selectable functions available. Only Input

2 may apply function F2 where 8 selectable functions are available.

The system has the function to sound the connected audible siren when input triggered.

This output is available on PIN1 and PIN2 of the connector block. To turn On/Off this

function, you can send the following SMS command to the unit.

Text Command:

*ALM[N]#X

N stands for Input number 1 – 2

X stands for ON (1) or OFF (0) value

When *ALM1#1 is applied, means audible alarm will sound when Input 1 triggered.

When *ALM1#0 (Default) is applied, means audible alarm will not sound when Input 1

triggered.

The alarm siren can be set to determine how long the siren will remain active and this

can be done by sending the following SMS command to the unit.

Text Command:

*ALTM#XXXXX

XXXXX stands for 5 digits value: The number of seconds (00000-65535)

Example:

When *ALTM#03600 is applied, means the audible alarm will sound for 1 hour when

triggered

5.6 ALARM SETTINGS

5.6.1 Turning the Audible Siren Functions On/Off When Inputs Triggered

5.6.2 Setting the Alarm Time For Audible Alarm (Default: 600 seconds)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 28 29

Sin comentarios

Witura WT-1011RC IP 65 Manual de usuario Pagina 20