Witura WT-1011RC IP 65 Manual de usuario descargar pdf (Pagina 13)

WT-1011RC IP65 GSM Remote Controller

And Alarm S

stem

WT-1011RC IP65 – USER MANUAL – Rev.1.6 – Technical Support: [email protected]

WITURA CORPORATION SDN BHD

*RETR#22222000

Example of Returned Message:

#RETR=22222000

This function allows the second relay to latch at a specific time (GOTX) later after the

first relay has latched and when the first relay has switched off the second relay will

switch off after a specific time (GOTY).

Text Command to Enable this Function:

*FTRY#2

Text Command to Enable the normal Function (5.3.1):

*FTRY#1

Example:

To program the device so that when you latched relay 1, relay 2 will latch 5 seconds

(GOTX) later.

*GOTX#00005

Example of Returned Message:

#GOTX=00005

Example:

To program the device so that when the relay 1 closes, relay 2 will closes

10 seconds (GOTY) later.

*GOTY#00010

Example of Returned Message:

#GOTY=00010

Note: When using this function, the *GOTX# delay time value you programmed must be

smaller than the latching time of output relay 1 (*GOT1#) otherwise the system will return an

error message.

5.4.4 Follow function for Output Relays

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 28 29

Sin comentarios

Witura WT-1011RC IP 65 Manual de usuario Pagina 13