Witura WT9002 Manual de usuario descargar pdf (Pagina 24)

WT-9002 IP65 User Manual

WT-9002 IP65 – USER MANUAL – Rev.2.0 – Technical Support: [email protected]

WITURA CORPORATION SDN BHD

Relay 1 can also be activated via caller ID from any number that has been programmed

in to the authorized user list or the administrators.

Relay 2 can only be activated and controlled by the 3 administrator numbers as

programmed in to the unit.

It is possible to activate the relays to latch for 1 second at factory default by sending the

below SMS command.

Note: The latch time value can be changed via *EXT# command

Send the following 2 SMS Command:

1) *ECL1#

2) *ECL2#

Returned Message:

ECLK1<OK>

ECLK2<OK>

It is possible to extend the latching time of both relays for up to the maximum of

65,535 seconds and to change both relay latching times you would send the following

SMS command to the unit assuming relay 1 will be 10 seconds and relay 2 will be 60

seconds every time it activates.

Example: Sending the following 2 SMS Command

*EXT1#00010

*EXT2#00060

Example of Returned Message:

EXT1=00010

EXT2=00060

4.16 ACTIVATE RELAYS VIA SMS

4.17 EXTENDING LATCHING TIME OF RELAYS VIA SMS

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 46 47

Sin comentarios

Witura WT9002 Manual de usuario Pagina 24