Witura WT-1010C2 Manual de usuario descargar pdf (Pagina 34)

101

USER MANUAL

When *DTM?#1 is applied, it will send the status of the system via SMS to the

programmable administrator/central station number at the programmed report time

interval.

When *DTM?#0 (Default) is applied, it will not send the status of the system.

To enable this function, you would send *DTM?#1 SMS command to the unit.

Return Message

DTIME-ON

5.9.3 Editing the Message Contents of SMS Report (Up to 50 Characters)

The message contents can be edited and programmed up to 50 characters. You can

change the displayed text by sending the following commands by SMS message to the

unit.

Text Command:

*TSMS#XXXXXX…

XXXXXX… stands for message contents

Example:

If you want the SMS Report to display “Status:Online”, you would send the following

SMS message to the unit.

*TSMS#Status:Online

Return Message

TSMS=Status:Online

5.9.4 Enable/Disable the function of Dialing the programmed Administrator

number/Central Station number for Auto Test

To program the unit to dial the programmed administrator/central station number for

auto test report, you can send the following SMS command to the unit.

Text Command:

*DTC?#X

X stands for ON (1) or OFF (0) value

WT1010C2 – USER MANUAL – Rev.2.7 – Technical Support : [email protected]

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

Sin comentarios

Witura WT-1010C2 Manual de usuario Pagina 34