Witura WT-1010C2 Manual de usuario descargar pdf (Pagina 27)

101

USER MANUAL

Text Command:

*ANY?#X

X stands for ON (1) or OFF (0) value

When *ANY?#1 is applied, means only administrator can access the system

When *ANY?#0 (Default) is applied, means any person can access the system

To activate this function, you would send *ANY?#1 SMS command to the unit.

Return Message

ANY-ON

To set the time, you can send the following SMS command to the unit. The time is

entered in 24 Hour format.

Text Command:

*SETM#HH:MM:SS

HH stands for 2 digits value: Hour

MM stands for 2 digits value: Minute

SS stands for 2 digits value: Seconds

Example:

When *SETM#08:30:15 is applied, the time 08:30:15 will be displayed on the

LCD screen.

08:30:15

WT-1010

5.3 Time Setting

Return Message

SETM-OK

Note: Time setting is necessary for Auto Test Function at No. 9) “Auto Test”

Settings (Page)

WT1010C2 – USER MANUAL – Rev.2.7 – Technical Support : [email protected]

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

Sin comentarios

Witura WT-1010C2 Manual de usuario Pagina 27