Witura WT-9001 IP65 Manual de usuario descargar pdf (Pagina 21)

WT-9001 IP65 GSM Remote Control And Alarm System

WT-9001 IP65 – USER MANUAL – Rev. 3.4 – Technical Support: technical@witura.com

Text Command:

*ALAC#X

X stands for ON (1) or OFF (0) value

When ever the *ALAC#1 command is activated and the power down alarm is on any of

the Administrators programmed to receive text alerts, will receive the following

messages from the unit in the event of power down and also when power is restored.

Power down and text alert received: ACP-OFF

Power restored and text alert received: ACP-ON

Whenever there is power failure, the unit can generate text alerts to all 20 of the

administrator’s Mobile phone numbers. To set the administrator to receive this alert, you

would send the following commands by SMS message to the unit.

Text Command:

*REAC#X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X;

X stands for position for 1 - 20 administrators with function value: 0 (OFF), 1 – 9

(number of text alerts)

Example:

To generate 2 SMS to administrators 1, 2, 3 and 1 SMS to the rest when AC failure, you

would send the following SMS message to the unit.

*REAC#2,2,2,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1;

Example of Returned Message:

REAC=2,2,2,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1;

The system has an anti-theft function that can used to detect the person who hijacks the

WT-9001 device. It allows the owner to identify the hijacker’s SIM Card number by

sending a warning message to the programmed owner’s number when the SIM card has

5.5.5 Anti-Theft Feature

5.5.4 Setting the Recipient of AC Failure Alert

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 30 31

Sin comentarios

Witura WT-9001 IP65 Manual de usuario Pagina 21