Witura WT-211 Manual de usuario descargar pdf (Pagina 3)

WT-211 GSM/GPRS Wireless Modem

______________________________________

WT-211 – USER MANUAL – Rev.1 – Technical Support : Technical@witura.com - www.witura.com

Figure 2

Install and Start the WT-211

Step 1: Connect PC and Modem: Connect the “15-pin SUB D” port of wireless modem and PC’s serial

port with standard cable provided.

Step 2: Install antenna: Screw on antenna.

Step 3: Install SIM card according to “Installing SIM Card”

Step 4: Start wireless modem: Connect the 4 pins Micro-Fit™ power adapter to the wireless modem, the

LED indicator (Network) flashes. About 20 seconds later, the wireless modem finishes login and

the LED indicator (Network) flashes once every 3 seconds.

The WT-211 is ready for wireless communication through GSM network.

Test the connection of PC and Wireless Modem

1. Set up HyperTerminal

Enter HyperTerminal in Window XP or Window 2000 according to the following order:

“Start”

→ “Programs” → “Accessories” → “Communications” → “HyperTerminal”

If “HyperTerminal” has not been setup, the following will display.

Figure 3

Input the name of the connection to be established, e.g. “ABC” as shown in Figure 3. Press “OK” and

the dialogue box for serial port selection is shown in Figure 4.

1 2 3 4 5 6 7 8 ... 15 16

Sin comentarios

Witura WT-211 Manual de usuario Pagina 3