Witura GSM VOIP Gateway Series Manual de usuario descargar pdf (Pagina 6)

WITURA CORPORATION SDN BHD

Office Address: 18-8-C, Gurney Tower, Persiaran Gurney, 10250 Penang, Malaysia. Tel: 604 - 228 9053 Fax: 604 – 228 9054

URL: http:// www.witura.com

Email: sales@witura.com

- 6 -

The third and the forth digit is the code of malfunction:

“00”: good “11”: failed in login onto GSM network

“22” or “33”: PIN error (PIN code isn’t 1234 or PIN isn’t disabled),

“44”: lock card error, “55”: lock terminal error

“77”: lock network error, “99”: read card error

The later four digits is the code of software version: for example 4060 indicates the software version code

is 4.06.

If the telephone displays “11”or “22” or “33” or “44” or “77” or “99” or the telephone can’t work in gear,

please contact service provider.

Inquire Signal Quality and Software Version

Lift the handset and then dial “***9#”. Hang up as soon as you hear the busy tone. The telephone rings and

displays a code of 8 digits. The code indicates the information of signal quality and software version as

follows:

The first two digits indicate signal quality. It ranges “00” to “31”. Stronger the signal is, bigger the digits is.

If it is less than 10, the quality of voice will be poor.

The third and the forth digits are both standby.

The later four digits is the code of software version: for example 4060 indicates the software version code

is 4.06.

Adjusting the Volume of Voice

Lift the handset or press “hand-free” key.

Dial “*33XY#” and then hang up when hear the sound of toot.

X and Y both belong to the digits that range from 1 to 5. X indicates microphone volume and Y indicates

speaker volume. Level 1 is the lowest volume and level 5 is the highest.

1 2 3 4 5 6 7 8

Sin comentarios

Witura GSM VOIP Gateway Series Manual de usuario Pagina 6